Welcome to our website! As we have the ability to list over one million items on our web site (our selection changes all of the time), it is not feasible for a company our size to record and playback the descriptions on every item on our web site.

However, if you are an American with a disability we are here to help you. Please call our disability services phone line at (817) 570-3133 during regular business hours and one of our kind and friendly personal shoppers will help you navigate through our web site, help conduct advanced searches, help you choose the item you are looking for with the specifications you are seeking, read you the specifications of any item and consult with you about the products themselves. There is no charge for the help of this personal shopper for any American with a disability. Finally, your personal shopper will explain our Privacy Policy and Terms of Service, and help you place an order if you so desire.

0 Item(s) View Cart

Services and Repair

Air Conditioning Repair

We have experience working on all models and brands of air conditioning units and systems. If your air conditioning doen’t come on, the air conditioning is leaking or you have any other problematic issues with it, call our toll free number and let us deal with it in order to bring your air conditioning to normal working condition. You can reach us 24/7 at our toll free number

817-570-3133

For parts only: 817-570-3133

Please note that all purchased AC parts are shipped directly to you.

We ONLY work on residential appliances. We do NOT work on commercial/small appliances. (i.e. Blenders, Vacuums, etc.)

We repair all air conditioning brands such as:

  • Caloric
  • Carrier
  • Bryant
  • GE
  • Lennox
  • Rheem
  • Ruud
  • Puron
  • York
  • Trane
  • Tempstar
  • and more

The information below is to help you learn more about your air conditioner. This information will also help you to use your air conditioner in the most efficient and effective way and you will be able to save money on utility bills and future repairs. The life of your air conditioner will be also be extended.

Caution: AIR CONDITIONERS CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED. Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any air conditioner repairs on your own. All air conditioner repairs require professional experience and training with electric systems and can become dangerous if you are not knowledgeable. For help call our air conditioning repair service technicians in Fort Worth 24/7 at:817-570-3133

Air Conditioning Insides

Directing the Air Movement The components are relatively simple. They consist of the blower their motors, and dampers or louvers to direct the air and to admit outside air for ventilation. These dampers are mechanical, anti shell linkages are easy to locate and repair when trouble occurs.
A run capacitor is often used with blower motors also, and is tested just as the compressor run capacitor. If the capacitor fails, the motor will hum and may even turn at a very low speed. Nobody should be made to operate the fan motor in this condition.
A loud noise from the fan could be caused by worn or dry bearings or by a loose blower wheel. Tightening a squirrel-cage blower may inquire a long-arm setscrew wrench (such as Sears Craftsman 9046673). You may not be able to see the setscrew itself. Look for a notch in one of the blades on the side next to the motor an access opening directly over the setscrew. The lubrication of dry bearings does not eliminate bearing noise, you’ll have to remove the motor and take it to a motor shop for bearing replacement. To lubricate, look for a screw or a plastic plug on each of the motor’s bell housings, and lubricate with a light, high-quality or SAE 20 non-detergent motor oil at the beginning of each season. Make sure to replace the screws or plugs. Don’t overlook the more obvious problems of the air-movements the cooling fins and the air filter. A tremendous volume of air moves through your air conditioner in a summer’s operation. Check the filter every two weeks, and replace it when it can’t be completely cleaned. Should the coils themselves become clogged, use a commercial solvent such as Aqua-Sol or Calgon coil cleaner, available from refrigeration-supply distributors.
Also available is a “fin comb" for straightening bent or damaged cooling fins. Any condition that retards air flow can cause the evaporator coil to frost over. This turn blocks air passages and results in loss of cooling capacity.
Should the air condition bring water in the room area, check the passage ways provided? Curry the Condensate away from the evaporator to the sump al the Condenser Slinger ring.
To help your air conditioner cope with its summer load, start it early in the morning on hot days before the house absorbs radiant heat I win the sun. This allows it to keep up as the heat load builds up. Treat the cool air upwards for more efficient circulation. Keep curl s and other obstructions away from the air stream.

Caution: AIR CONDITIONERS CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED. Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any air conditioner repairs on your own. All air conditioner repairs require professional experience and training with electric systems and can become dangerous if you are not knowledgeable. For help call our air conditioning repair service technicians in Fort Worth 24/7 at: 817-570-3133


Dishwasher Repair

If your dishwasher requires professional repair help because it doesn’t fill up with water, it’s leaking or you have any other problems, just call our toll free number and let us take care of the rest returning your dishwasher to perfect working order. Call us 24 hours a day, 7 days a week to schedule an appointment for your Fort Worth dishwasher repair. We will do our best to set up a dishwasher repair appointment for a time that is most convenient for you:

817-570-3133

For parts only: 817-570-3133

Please note that all purchased dishwasher parts are shipped directly to you.

We don’t work on commercial and small appliances such as vacuum cleaners, sewing machines etc. We work only on major appliances such as washers, dryers, refrigerators, ovens, stoves, dishwashers etc.

We repair all dishwasher brands in Fort Worth such as:

  • Kenmore
  • Maytag
  • Frigidaire
  • Magic Chef
  • GE
  • Whirlpool
  • Kitchen Aid
  • Jenn Air
  • Speed Queen
  • Montgomery Wards
  • Kelvinator
  • and more

Our dishwasher repair service area includes all of Fort Worth

The information below is to help you learn more about your dishwasher. This information will also help you to use your dishwasher in the most efficient and effective way and you will be able to save money on utility bills and future dishwasher repairs. The life of your dishwasher will be also be extended.

Caution: DISHWASHERS CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any dishwasher repairs on your own. All dishwasher repairs require professional experience and training with electric and plumbing systems and can become dangerous if you are not knowledgeable. For help in Fort Worth call our dishwasher service technicians 24/7 at: 817-570-3133

Dishwasher detergents

If you’re not satisfied with the dishwasher washing results that you are getting, try another dishwasher detergent brand. Some dishwasher detergent brands work better in particular winter conditions than others. Never substitute dishwasher detergent winter conditions play a big hurl in the results that you obtain from dishwasher detergent. One directly-related problem that you may encounter it inning condition that may show up on glass ware. If it is a temliminy precipitate, it can be removed by using a “stripping" cycle, ad cup of bleach (no detergent) in the dishwasher wash water followed by a tip of vinegar in the rinse water. Then allow dishwasher to go through the cycle. This should remove the hardness film. To prevent it from reoccurring,dishwasher you using enough detergent in the wash water, and living it rinse additive such as Jet-Dry or Dish-Dry One of these mini solutions, help in obtaining good dishwasher washing results, especially in hard water. Primarily wetting agents, they reduce water surface, allowing the water to flow off the dishes. Most additive dishwasher dispensers, filtering require a few drops during the final rinse and it last for about three months. Check the level periodically. If your dishwasher has no dishwasher detergent. Additives they are available in cake form for suspending from the nickel. This works well. If the hard water condition is severe, the solution may be to install a water softener. Allow surface condition of glassware which is often confused Filming is etching. In this case the damage is permanent. It is done by the composition of the glass, and is primarily a reaction conditions amplified by the heat and strong chemical solution found within the dishwasher. It should be recognized that can occur even when the dishes are hand washed, but at a dishwasher role and it is the heat and strong detergent which allow easier to clean more thoroughly and efficiently than is possible hand washing. As a rule, etching is more likely to occur on high quality glassware than on the less expensive types. Finally dishwashercheck to be sure the dishwasher is being loaded according to the manual instructions. The design of the dishwasher racks differs in each other a lot of thought and effort goes into each one, providing replacement for the particular water patterns of the dishwasher. It’s the water that does the scrubbing, and it has to reach each part of the utensil or glassware before good results result’s can be expected. Watch particularly for “blocking water flow" it large platter or plate directly in line with a smaller one placing a cup or saucer inside another without enough water to penetrate. Also be certain that no large items Place this knives or spatulas project out of the basket where they might block the dishwasher spraying arm. The main dishwasher motor turns in one direction only, and the pump is often powered by a smaller motor. Some dishwasher models eliminate the pump, nut use a solenoid-operated dump valve to empty the water and drain by gravity flow.

Caution: DISHWASHERS CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED.

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any dishwasher repairs on your own. All dishwasher repairs require professional experience and training with electric and plumbing systems and can become dangerous if you are not knowledgeable. For help call our dishwasher service technicians 24/7 at: 817-570-3133


Disposal Repair

If your garbage disposal requires professional repair help because it doesn’t drain the water, doesn’t start or you have any other problems, just call our toll free number and let us take care of the rest returning your garbage disposal to perfect working order. Call us 24 hours a day, 7 days a week to schedule an appointment for your Fort Worth garbage disposal repair. We will do our best to set up a repair appointment for a time that is most convenient for you:

817-570-3133

For parts only: 817-570-3133

Please note that all purchased dishwasher parts are shipped directly to you.

We don’t work on commercial and small appliances such as vacuum cleaners, sewing machines etc. We work only on major appliances such as washers, dryers, refrigerators, ovens, stoves, dishwashers etc.

The information below is to help you learn more about your garbage disposal. This information will also help you to use your garbage disposal in the most efficient and effective way and you will be able to save money on utility bills and future repairs. The life of your garbage disposal will be also be extended.

Caution: GARBAGE DISPOSALS CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any garbage disposal repairs on your own. All garbage disposal repairs require professional experience and training with electric systems and can become dangerous if you are not knowledgeable. For help call our garbage disposal service technicians 24/7 at:

Garbage Disposers

Most are strong and rugged, but even so they aren’t able to grind up all wastes. If long, trouble free service is to be expected, care should be taken in the type of garbage stuffed into the hopper THE BIGGEST TROUBLE with garbage disposers is caused by those using the appliance. An operator should be thoroughly familiar with manufacturer instructions regarding what can and what can’t be placed in a disposer.
Any garbage disposer will grind and get rid of soft food wastes, such as meat particles, bread scraps and soft vegetable leftovers. However, only the more expensive models-specifically, those equipped with capacitor-start motors-also can handle bones, seafood shells, corncobs and other heavy food matter. No garbage disposer is designed to handle non-food wastes. They are not built to grind glass, pottery, broken dishes, bottle caps, rubber, plastic, silverware, string, cardboard, paper or rags. Placing this stuff into a food disposer will damage the unit and can clog the drain? A garbage disposer can be installed in homes served by septic systems as well as those served by municipal sewers. However, there could be a problem if the drain field is not adequate to accommodate the extra load placed on it by the unit. A garbage disposer uses about six gallons of water per day. To be on the safe side, then, your drain field should meet the following minimum requirements:

Number of Occupants in Home Size of Septic System

  • 4 750 gallons
  • 6 900 gallons
  • 8 1000 gallons
  • 10 1250 gallons

If the septic system is smaller than this the number of occupants, installation of a garbage disposer might overload the field. The secret is rotary action BASICALLY, A GARBAGE DISPOSER is a simple machine (as are so many other appliances. It consists of two chambers an upper and lower that are bolted together with a gasket between them to prevent water from leaking. Garbage is placed down the throat of the upper chamber. The only other part in the upper chamber is a round metal ring that has teeth cut into it. The ring, which is called a shredder, is attached to the sides of the upper chamber and extends around the entire circumference. When you drop garbage into the upper chamber, it falls on a round disc which is the flywheel or table. The flywheel may or may not have a disc attached to its top onto which the garbage falls, but this is immaterial. However, the flywheel is equipped with two or more impellers or hammers that move freely on pivots. When the flywheel is at rest, the impellers lie flat. But when the flywheel revolves, the impellers fly outward and also revolve, tossing garbage against the shredder. Garbage is ground into bits and is washed down the drain by cold water, which should be running during the entire cycle.

Caution: GARBAGE DISPOSALS CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any garbage disposal repairs on your own. All garbage disposal repairs require professional experience and training with electric systems and can become dangerous if you are not knowledgeable. For help call our garbage disposal service technicians 24/7 at: 817-570-3133


Dryer Repair

If your dryer requires professional repair help because it don’t dry the clothes all the way, starts and suddenly stops or you have any other problems, just call our toll free number and let us take care of the rest returning your dryer to perfect working order. Call us 24 hours a day, 7 days a week to schedule an appointment for your Fort Worth dryer repair. We will do our best to set up a repair appointment for a time that is most convenient for you:

817-570-3133

For parts only: 817-570-3133

Please note that all purchased dryer parts are shipped directly to you.

We don’t work on commercial and small appliances such as vacuum cleaners, sewing machines etc. We work only on major appliances such as washers, dryers, refrigerators, ovens, stoves, dishwashers etc.

We repair all dryer brands such as:

  • Magic Chef
  • Speed Queen
  • Jenn Air
  • Kitchen Aid
  • Maytag
  • Kenmore
  • Modern Maid
  • Montgomery Wards
  • Roper
  • Whirlpool
  • Kelvinator
  • and more

The information below is to help you learn more about your dishwasher. This information will also help you to use your dishwasher in the most efficient and effective way and you will be able to save money on utility bills and future dishwasher repairs. The life of your dishwasher will be also be extended.

Caution: DRYERS CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED.

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any dryer repairs on your own. All dryer repairs require professional experience and training with electric and gas systems and can become dangerous if you are not knowledgeable. For help call our dryer service technicians 24/7 at: 817-570-3133

AUTOMATIC DRYER CONTROL

In this system a single-pole, double-throw thermostat is connected to the dryer timer motor and the heat source. With this arrangement, one or the other of the dryer components is energized, but never both at the same time; when the heat source is off, the dryer timer motor is on, and vice versa. By using a short-duration timer in conjunction junction with the dryer thermostat, a time/temperature relationship is automatically established. It works like this: The dryer thermostat, which senses the temperature of the exhaust air, turns off the heating element or burner upon start-up. The timer motor is off, and the timer not advances. The clothing is very damp al this point, entering the drum from the heat source absorbs a great deal of moisture. Because of the evaporative process, the temperature remains fairly cool and temperature rise is rather low. If the dryer now shuts down with the proper little sensor is shorted or grounded. Look for clips, or wire strands across the “feelers" or for a break in the insulating, material If the dryer continues to run, the problem is most likely within the control. You may use your VOM to check further by testing the timer contacts or the relay. Stuck timer or relay contacts prevent the dryer from turning off. Open or high-resistance contacts prevent the dryer from running. If these components test okay, your problem definitely is in the control area. Before condemning the control, however, check to see that a positive ground is provided by a wire attached from the cabinet to the cold-water line. Since the critical control current is fed to ground, this wire must be provided in addition to the cabinet ground provided to file neutral line of the power supply, used in most areas. While a ground to a water line is acceptable for safety purposes, it is not sufficient to allow proper operation of electronic controls.

DRYER THERMOSTATS

Thermostats are also of great importance in determining the dryer temperature relationship, vital for good results in drying clothes. Those which control the operating temperature are referred to as operating thermostats, to distinguish from high-limit thermostats, used as safety devices to prevent severe overheating. Many operating dryer thermostats are adjustable ones, controlled by the user when setting the heat range or temperature control. Typically, they consist liquid or gas filled thermal bulb, connecting capillary tubing, a closed expandable diaphragm, switch contacts, and a control screw. The thermal bulb is normally located in the exhaust air stream. As temperature rises, the liquid in the sealed bulb vaporizes, exerting pressure in the diaphragm at the opposite end of the capillary tube connecting the two components. Pressure causes the diaphragm to expand, and the resulting movement opens the switch contacts, breaking the electrical circuit to the heat source. As the exhaust air cools, the diaphragm contracts and again closes the switch, resuming heat input. This cycling action, which maintains desired temperatures, may occur many times during a drying period. The “temperature" knob on the dryer turns the control screw, which places spring tension against the diaphragm, thus varying the amount of pressure required to activate the switch contacts and raise or lower temperature levels.
If your dryer has no control knob with which you adjust the temperature, it likely uses fixed bimetallic thermostats. The dryer fixed-temperature thermostat is also often used as high-limit or safety device. Wired in series with the heat source, it is located on the housing of the heating element or burner. Fan-belt breakage, blockage of air flow, or any other condition that could contribute to overheating causes the high-limit device to open, breaking the electrical circuit to the heat source. This keeps the dryer heat at a safe level.

Caution: DRYERS CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED.

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any dryer repairs on your own. All dryer repairs require professional experience and training with electric and gas systems and can become dangerous if you are not knowledgeable. For help call our dryer service technicians 24/7 at: 817-570-3133


Heating Repair

If your heating/furnace requires professional repair help because it doesn’t heat properly, thermostat doesn’t start the unit or you have any other problems, just call our toll free number and let us take care of the rest returning your heating/furnace to perfect working order. Call us 24 hours a day, 7 days a week to schedule an appointment for your Fort Worth heating/furnace repair. We will do our best to set up a repair appointment for a time that is most convenient for you:

817-570-3133

For parts only: 817-570-3133

Please note that all purchased furnace and heating parts are shipped directly to you.

Please note We ONLY work on residential appliances. We do NOT work on commercial/small appliances. (i.e. Blenders, Vacuums, etc.

We repair all heating systems brands such as:

  • Carrier heating units
  • Bryant heating units
  • Caloric heating units
  • GE heating units
  • Heil heating units
  • Ruud heating units
  • Lennox heating units
  • Airtemp heating units
  • and more

The information below is to help you learn more about your heating/furnace. This information will also help you to use your heating/furnace in the most efficient and effective way and you will be able to save money on utility bills and future repairs. The life of your heating/furnace will be also be extended.

Caution: HEATING/FURNACES CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED.

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any heating/furnace repairs on your own. All heating/furnace repairs require professional experience and training with electric systems and can become dangerous if you are not knowledgeable. For help call our heating/furnace service technicians 24/7 at: 817-570-3133

EASY HEATING TIPS

In an emergency, you can get the heating system or furnace to operate by taking the oil valve out of the system. Disconnect the heating system or furnace and output oil lines at the valve. Remove the valve, and connect the input line right to the output line. Oil will now flow, and you will be able to get heat, but be sure to have the valve serviced and put back into the system as soon as possible. Make sure that there is an ample supply of oil. This is not as obvious as it seems to be. After all, you have seen many people run out of gas on the highway. Don’t always trust the gauge of an indoor tank. It can stick. Tap the gauge to see if the needle remains in place. If the cap of an outside tank is accessible that is, if you are able to shovel away the snow to get to it check out the supply with a dipstick. Naturally, if there is no oil in the tank, there will be no heat.
Caution: Never do any work inside an oil burner unless all emergency switches are turned off. You could be seriously injured. Some nozzle-and-electrode assemblies are fairly easy to get at by simply removing an access cover. Others are more difficult. You may have to detach and drop the transformer. In any event, once you can reach inside the burner, loosen the oil-line connection with a wrench and disconnect the transformer and electrode wires. Usually these wires are held by snap-on connectors. Take the nozzle-and-electrode assembly out of the burner, but be careful that you don’t bang the electrodes and upset their setting. Lay the assembly on a clean surface and unscrew the nozzle. Use two wrenches one to hold the assembly steady and the other to unscrew the nozzle. You will probably find a small filter inside the nozzle. Remove it and wash it in warm water. Probably you will also find a small set screw inside the nozzle. Take this out, too, and wash it in warm water. A clogged filter or dirt-covered set screw will hamper the flow of fuel. Blow through the nozzle. If the nozzle is clean, air will pass through it freely. If it is not clear, you have found the reason for furnace failure, but there is not much you can do about it unless you have a spare nozzle around. A nozzle is preset and should not be widened with a piece of wire or some such probe. Widening a nozzle will result in furnace “puff" not in furnace operation. Clean off the electrodes carefully with a rag or piece of fine steel wool. A reminder don’t upset the setting. Place the assembly back into the burner and connect all wires. Turn on the emergency switches and press the stack-control relay switch. Hopefully, the furnace will start up and run.
Important: Rotary-type oil burners do not have nozzles. To service the electrodes, turn off the emergency switches, reach inside the burner with a rag, and wipe the electrodes clean without upsetting the electrode setting what to do if the gas burner doesn’t light.

GAS IS MORE DANGEROUS to handle than oil. That is why troubleshooting is limited. If for some reason the flow of gas is shut off in your neighborhood, there is nothing that you can do to get your furnace operating. Otherwise, follow this procedure:

Check the thermostat The exact same method described above for a thermostat that controls an oil burner should be followed for a thermostat that controls a gas burner.

Check the safety switchto see that it hasn’t been turned off accidentally. This switch is usually mounted right on or right near the furnace. See if the gas pilot light is functioning. If the pilot is not burning, attempt to light it as outlined on the instruction plate which is attached to the furnace. A pilot light that refuses to light probably is clogged with dirt or carbon. Turn off the safety switch and the gas valves that control the main burner and pilot. Tap the pilot burner with a screwdriver in an attempt to dislodge dirt or carbon. Now, turn the control valve for the pilot back on and try to light the pilot. Do not open the control valve to the main burner until the pilot is lit. If the pilot lights, turn on the control valve for the main burner and switch on the electricity. Set the thermostat.

Caution: Do not try to light a main burner by hand. A flare-up could result that could cause injury. If the pilot does not light, forget the whole thing. Turn off the pilot control valve, and wait for a service technician.

Caution: HEATING/FURNACES CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED. Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any heating/furnace repairs on your own. All heating/furnace repairs require professional experience and training with electric systems and can become dangerous if you are not knowledgeable. For help call our heating/furnace service technicians 24/7 at: 817-570-3133


Microwave Repair

If your microwave requires professional repair help because it doesn’t heat up your food, when starts you can hear buzzing noise or you have any other problems, just call our toll free number and let us take care of the rest returning your microwave to perfect working order. Call us 24 hours a day, 7 days a week to schedule an appointment for your Fort Worth microwave repair. We will do our best to set up a repair appointment for a time that is most convenient for you: 817-570-3133

For parts only: 817-570-3133

Please note that all purchased microwave parts are shipped directly to you.

We don’t work on commercial and small appliances such as vacuum cleaners, sewing machines etc. We work only on major appliances such as washers, dryers, refrigerators, ovens, stoves, dishwashers etc.


Oven Repair

If your oven requires professional repair help in Fort Worth because it doesn’t get bake evenly, the oven door doesn’t close properly or you have any other problems, just call our toll free number and let us take care of the rest returning your oven to perfect working order. Call us 24 hours a day, 7 days a week to schedule an appointment for your Fort Worth oven repair. We will do our best to set up your oven repair appointment for a time that is most convenient for you:

817-570-3133

For parts only: 817-570-3133

Please note that all purchased oven parts are shipped directly to you.

We don’t work on commercial and small appliances such as vacuum cleaners, sewing machines etc. We work only on major appliances such as washers, dryers, refrigerators, ovens, stoves, dishwashers etc.

We repair all oven brands in Fort Worth such as:

  • Magic Chef ovens
  • Maytag ovens
  • GE ovens
  • Dacor ovens
  • Jenn Air ovens
  • Sunray ovens
  • Kenmore ovens
  • Kitchen Aid ovens
  • Whirlpool ovens
  • Tappan ovens
  • Frigidaire ovens
  • and more

The information below is to help you learn more about your oven. This information will also help you to use your oven in the most efficient and effective way and you will be able to save money on utility bills and future repairs. The life of your oven will be also be extended.

Caution: OVENS CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED.

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any oven repairs on your own. All oven repairs require professional experience and training with electric and gas systems and can become dangerous if you are not knowledgeable. For help call our oven service technicians 24/7 at: 817-570-3133

OVEN HEATING ELEMENTS

Heating elements, like other components on paralytic self-cleaning ovens, are heavy duty and heat resistant. Temperature must be brought up slowly to insure complete soil oxidation. In some ovens, cycling switches are employed to continuously cycle the ovens at about 50 percent on time during cleaning. Cycle switches are located beneath the service panel and are connected in series with the heating elements. They are similar in appearance fit “infinite-heat" type surface unit controls but are nonadjustable and must be replaced it’ faulty. Since the cycling rate depends upon the wattage of the oven heating element, be sure to replace with the exact switch specified for your oven. Another method is to connect the upper and lower oven healing elements in series during cleaning, dividing the voltage between them. This fit accomplished by means of the selector switch. Once cleaning process reaches of 875 degrees or so are reached, the elements are cycled to maintain temperature by a high-limit control. This may be a separate switch, or it may be a set of contacts incorporated into the thermostat.

OVEN DOOR SEALS

The oven door gasket is made of a tough woven fiberglass material that withstands a good deal of abuse. Unless it’s torn, it probably won’t require replacement during the oven lifetime. If replacement should prove necessary, be sure to leave the specified gap across the bottom of the oven throat or door. This allows room air to enter the oven body during baking and cleaning. The oven is also vented at the top, usually under a surface unit.
The oven throat outside the oven door seal should be wiped with a damp cloth prior to cleaning the oven, since it isn’t subject to the high heat of cleaning. This is usually easily done, since it isn’t sill) jetted to baking heat, either, and the foods aren’t baked on. When cleaning extremely heavy soils, some smoke may escape around the corners of the gasket and should be wiped away when the cycle is completed. Never use a commercial oven cleaner on any part of’ it self-cleaning oven, paralytic or catalytic.
The oven door is adjustable by first slightly loosening the screwy which hold inner and outer oven door panels together, then carefully twisting the door to the desired position. Tighten the liner screws, being careful not to chip the oven porcelain. Hinge screws are usually adjustable tow; i it I the front or rear of the oven through the use of elongated slots. To check the oven door seal, close the door on a shim made of construction paper, about one inch wide and eight inches long. When removing the shim, a definite drag should be felt between door and gasket. Try this in several strategic locations around the door’s edge.

LOOK AND LISTEN

Become familiar with the sights and sounds of self-cleaners. The next time your oven self-cleaner is ready for a clean cycle, take a close look. Notice the appearance of the food soil before cleaning. See how the oven door latching mechanism works. Listen to the click of a solenoid, the whir of the latching motor, and the feel of the latch as the door is closed. Watch the clean and lock lights sequence. On some ovens, you may hear a cooling fan quietly pulling fresh air under exterior panels, thug lowering surface temperatures. A few minutes spent in such observation may provide a hot clue to pinpoint a future problem.

Caution: OVENS CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED.

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any oven repairs on your own. All oven repairs require professional experience and training with electric and gas systems and can become dangerous if you are not knowledgeable. For help call our oven service technicians 24/7 at: 817-570-3133


Refrigerator Repair

If your refrigerator requires professional repair help in Fort Worth because it doesn’t get cold enough, the food freezes on the bottom of the refrigerator or you have any other problems, just call our toll free number and let us take care of the rest returning your refrigerator to perfect working order. Call us 24 hours a day, 7 days a week to schedule appointment for your Fort Worth refrigerator repair. We will do our best to set up your refrigerator repair appointment for a time that is most convenient for you:

817-570-3133

For parts only: 817-570-3133

Please note that all purchased refrigerator parts are shipped directly to you.

We don’t work on commercial and small appliances such as vacuum cleaners, sewing machines etc. We work only on major appliances such as washers, dryers, refrigerators, ovens, stoves, dishwashers etc.

We repair all refrigerator brands in Fort Worth such as:

  • Maytag
  • GE
  • Magic Chef
  • Montgomery Wards
  • Kenmore
  • Kitchen Aid
  • Bosch
  • Admiral
  • Whirlpool
  • Fedders
  • Frigidaire
  • and more

The information below is to help you learn more about your refrigerator. This information will also help you to use your refrigerator in the most efficient and effective way and you will be able to save money on utility bills and future repairs. The life of your refrigerator will be also be extended.

Caution: REFRIGERATORS CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED.

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any refrigerator repairs on your own. All refrigerator repairs require professional experience and training with electric systems and can become dangerous if you are not knowledgeable. For help call our refrigerator service technicians 24/7 at: 817-570-3133

GAS REFRIGERATORS

Most basic refrigerators today are compact models for apartments and recreational vehicles. Those used in RVs often have a gas-absorption system. In a gas refrigerator, it is very important that passageways for fresh air flowing into and around the condenser he kept Free from restrictions. The gas burner must also he free from lint and dust.

HOW A GAS-ABSORPTION REFRIGERATOR USES HEAT TO COOL

Therefore a gas refrigeration system leaves the factory, it’s charged with hydrogen gas, water, and ammonia. The flame of a gas burner heats the mixture of ammonia and water present in the generator. This moves up through the riser tube (very much like the water in a coffee maker) time of the liquid turning to ammonia gas since ammonia has a lower boiling than water.
The ice gas generated passes through a liquid mixture in the analyzer, which it is enough to remove any water present. It now rises to the refrigerator condenser, where it cools and condenses to liquid ammonia. The liquid ammonia drains out of the refrigerator condenser and falls by gravity to the refrigerator evaporator, where it meets with hydrogen gas. The hydrogen causes the ammonia to evaporate very rapidly, and as it does it absorbs heat. The hydrogen-ammonia gas leaves the refrigerator evaporator carrying the heat which is absorbed, and flows downward since it is heavier than the pure hydrogen entering the refrigerator evaporator. (The evaporator is formed as a “tube within a tube. The absorber section, the hydrogen-ammonia gas mixture is made through several “waterfalls" created within the tubing by the water percolated from and flowing back to the generator (only one waterfall is -.lawn here for simplicity). The ammonia is absorbed by the water and the water liquid flows back to the generator, where the cycle begins. Since the water already contains all of the hydrogen that it can hold, the light gas is free to return to the evaporator from the absorber. When the refrigerator thermostat determines that the evaporator is cold enough, the burner flame is reduced to a “holding" point which is sufficient to maintain refrigerator evaporator temperatures. A malfunction within such a refrigerator is no repairable. The refrigerator must be returned to the factory. But the vast majority of refrigerator problems are outside the sealing problem, so look closely before condemning the sealed refrigerator. Because of the refrigerator evaporating principles, leveling of the refrigerator is critical. This is a major cause of refrigerator failure, especially in recreational vehicles where the gas absorption old operated valve placed on the refrigerator condenser. A major disadvantage of early auto-defrosting systems was that when heater warmed the refrigerator evaporator to melt the condensate, it also partly thaws any frozen food within the refrigerator evaporator, especially if the food was in direct contact with the refrigerator evaporator plate. A .that advance to eliminate this condition was adoption of the evaporator system. In this system the freezer evaporator is separated (and often insulated) from the refrigerator compartment which contains “section" of evaporator surface. Often two separate doors are weird, one for each compartment. The refrigerant first enters the freezer evaporator, and only after this evaporator is sufficiently cooled does the refrigerant flow to the refrigerator compartment evaporator. If the freezer section evaporator is often designed in a forward-opening shape to cradle the frozen food. Or a horizontal, O-shaped evaporator may completely encircle the food.

Caution: REFRIGERATORS CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any refrigerator repairs on your own. All refrigerator repairs require professional experience and training with electric systems and can become dangerous if you are not knowledgeable. For help call our refrigerator service technicians 24/7 at: 817-570-3133


Stove Repair

If your stove requires professional repair help in Fort Worth because some of the burners don’t come on, pilot light goes off or you have any other problems, just call our toll free number and let us take care of the rest returning your stove to perfect working order. Call us 24 hours a day, 7 days a week to schedule an appointment for your Fort Worth stove repair. We will do our best to set up a repair appointment for a time that is most convenient for you:

817-570-3133

For parts only: 817-570-3133

Please note that all purchased stove parts are shipped directly to you.

We don’t work on commercial and small appliances such as vacuum cleaners, sewing machines etc. We work only on major appliances such as washers, dryers, refrigerators, ovens, stoves, dishwashers etc.

We repair all stove brands in Fort Worth such as:

  • GE
  • Magic Chef
  • Maytag
  • Montgomery Wards
  • Whirlpool
  • Hot point
  • Jenn Air
  • Kitchen Aid
  • Kenmore
  • Frigidaire
  • Kelvinator
  • and more

The information below is to help you learn more about your stove. This information will also help you to use your stove in the most efficient and effective way and you will be able to save money on utility bills and future repairs. The life of your stove will be also be extended.

Caution: STOVES CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED.

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any stove repairs on your own. All stove repairs require professional experience and training with electric or gas systems and can become dangerous if you are not knowledgeable. For help call our stove service technicians 24/7 at: 817-570-3133

RULES FOR THE USE AND CARE OF A STOVE

On electric stove, cooking utensils should be essentially the same diameter as the top of the element used. The size of the stove is related to the size of the pan that goes on it and is not related to the speed at which it cooks. On gas stoves also, utensils of the proper size should be used and the flame adjusted so as not to extend beyond the best cooking results and proper stove safety precautions. Failure to follow this guideline increases the possibility of igniting clothing. Extreme care should be taken when wearing loose garments, particularly those with flowing sleeves. Make certain that gas or electrical installation is done by competent technician and electric stove circuit is properly grounded. Avoid blocking heated air circulation in oven when using cooking foil. Do not cover any openings in the oven bottom and do not cover entire shelves. Make sure that range is level. If not, cakes will rise unevenly. To minimize spatters during broiling, use the broiler pan designed for that model’s broiler not disposable ones. Clean all ranges regularly for sanitary and safety reasons in accordance with manufacturer’s instructions. Keep ventilating hoods and filters clean. Do not use oven or surface units for heating the home. Turn off surface units when cooking is finished or utensil is removed. Do not use oven door or range drawers as a step ladder or chair; be particularly careful that children don’t climb on oven or range. Stand away from range when opening oven door and let hot air or steam escape before removing or placing food. Keep children away from oven door surfaces during cooking or self-cleaning operations.

OVEN AND CABINET

The oven and cabinet are critical parts in both electric and gas ranges. The correct amount of insulation and the design of electric oven lank itself determine to a large extent the cooking results you can achieve with it. One of the first things to check is that the oven is level. Place level at least 12 inches long on the center oven rack. Level from hold back and from side to side by turning the threaded feet.

Ventilation

Every oven has a vent which allows air to enter, usually around file door itself, and flow out an opening located near the top of the oven. The door vent is often incorporated into the door seal it may appear is though part of the oven gasket is missing at the bottom of the door the upper vent often exits directly under one of the rear surface units. This ventilation system must be clear before good baking results can he achieved. Check it at any time when you are investigating a complaint of unsatisfactory oven temperatures.

Caution: STOVES CAN BE DANGEROUS TO REPAIR IF YOU ARE NOT EXPERIENCED AND CERTIFIED.

Do not take chances with your safety and health. The following tips are strictly for educational purposes. We strongly advise you to not get involved with any stove repairs on your own. All stove repairs require professional experience and training with electric or gas systems and can become dangerous if you are not knowledgeable. For help call our stove service technicians 24/7 at: 817-570-3133


Washer Repair

We have experience working on all models and brands of washers in Fort Worth and surrounding cities. If your washer leaks, the water doesn’t drain completely or you have any other problematic issues with it, call our toll free number and let us deal with it in order to bring your washer to normal working condition. You can reach us 24/7 at our toll free number for fast washer repairs in Fort Worth.

817-570-3133

For parts only: 817-570-3133

Please note that all purchased washer parts are shipped directly to you.

We don’t work on commercial and small appliances such as vacuum cleaners, sewing machines etc. We work only on major appliances such as washers, dryers, refrigerators, ovens, stoves, dishwashers etc.

We repair all washer brands in Fort Worth such as:

  • Montgomery Wards
  • Magic Chef
  • Maytag
  • GE
  • Kenmore
  • Jenn Air
  • Hotpoint
  • Kitchen Aid
  • Speed Queen
  • Whirlpool
  • Roper
  • and more

One word of caution:

Most of the time when an untrained person gets involved in washer repairs he has a great chance of creating a “basket of disassembled parts" — where your washer is a mess of parts that the washer repair technician must then reassemble before he can even check what the trouble is. Only once he has put the washer back together can he repair the original problem. This, of course, ends up costing you more for the same repair. In addition, if you get involved in washer repairs which you are not familiar and experienced with, it can be dangerous. This is because you deal with electricity and mechanical systems, so you can easily injure yourself. The information bellow is only for educational purpose and we don’t advise anyone to do your own washer repair. For professional help call us to schedule your repair appointment at our toll free number: 817-570-3133

WASHER INSIDES

Based on my many years of experience in the service business, I believe that the best four manufacturers of washing machines today, in alphabetical order, are Amana, General Electric, Maytag and Speed Queen. If they have made a reliable product. It also does not mean that no other manufacturer makes a quality product.
No matter what the brand name, be very careful about selecting the floor special. I believe that many base models are basically “bait `n switch" products, very cheaply made, designed to provide price, but not performance. Even some of the best manufacturers will stoop to this practice from time to time so that they can give their retailers a super competitive advertising item. Try to determine the average estimated service life of the product. The typical washing machine should last fourteen years. If you only get seven or eight years, you would be better off paying a hundred dollars more and getting a fourteen year service life. If you are really interested, ask the salesman to take off the front of the lower priced washing machine, and the front of a high priced machine by the same manufacturer. Are the machines noticeably different inside? Is the low priced machine of demonstrably cheaper construction (it shouldn’t be)?
If the salesman will not, or can not, take off the front side of the machine, to allow you to look at the inner construction, ask yourself if you would buy a car from an automobile dealership where they wouldn’t lift the hood and let you look at the engine, or from a salesman who couldn’t find the oil dip stick?

WASHER MAINTENANCE:

Very little maintenance is needed on a washing machine. It’s a good idea to wipe your washing – machine clown thoroughly at least once a week. If you spill detergent, clean it up immediately. Do not let your equipment get gunked tip with detergent, etc.
Twice a year cleats your machine with two quarts of white vinegar in a full tub full of hot water. Let the washing machine run through the entire cycle. It will look shiny and new when the cycle is completed.

TROUBLE SHOOTING

A washing machine is basically just a tub within a tub, within a square metal box. It has a motor attached to the transmission by a belt or direct drive attachment. The transmission will move the agitator back and forth, as well as spin the inner tub. There is also a pump to remove the water when the job is done.
If all the manufacturers put the same parts in the same places, and all the various parts looked like their counterparts on competitive machines, telling you how to fix a washing machine would be a snap. Unfortunately, the parts don’t all look the same and they are not situated in the same place. Therefore, please don’t try to repair a washing machine without that particular brand’s service manual.
Remember “knowledge is power." Buy the manual even if you never expect to do any repair work yourself.